MidSouth Crew

Homes & businessesMemphis & the Mid-SouthFree photo estimate

Garage and foundation slabs in Memphis.

A slab is the part of a building you'll never see again once it's poured, so it has to be right the first time. We form, reinforce and pour slabs for garages, additions, sheds, workshops and new construction across Memphis and the Mid-South.

Contractor or developer? Request a bid
For
Homes & businesses
Priced by
Free photo estimate
Ballpark
Next business day
Haul-off
Our own trucks
Garage & Foundation Slabs: Freshly poured concrete garage slab inside wood forms next to a house
Garage foundation slabRecent job

01

What goes into a slab that lasts

A good slab starts below the concrete. We clear and grade the site, compact the subgrade, add a gravel base and install a vapor barrier where the slab will be inside a building. Thickened edges carry the walls, and reinforcement ties the slab together.

On Memphis clay, base prep is what keeps a garage floor from settling or cracking as the soil swells and shrinks through the year.

02

Common slab projects

We pour slabs for:

  • Detached garages and carports
  • Room additions and sunrooms
  • Sheds, workshops and storage buildings
  • Equipment pads and HVAC pads
  • New-construction foundations for builders

03

Working with your builder or plans

If you have plans from an architect, engineer or building kit, we pour to those specs, including thickness, footing size and any anchor bolts or plumbing sleeves. For contractors and developers, we also price slabs as part of a bid from plans.

Most building slabs require a permit and inspection before the pour. We'll coordinate the timing so the inspector sees the forms and steel before concrete goes in.

04

What a concrete slab costs in Memphis

Slabs are priced from size, thickness and site prep. These typical ranges help you budget.

Concrete slab, installed$6–$10 per sq ft
Typical two-car garage slab (24 × 24 ft, 576 sq ft)$3,500–$5,800
Shed or pad (10 × 12 ft)priced per job from photos

Typical ranges only, not a quote. Thickened edges, footings and engineered specs change the price.

What moves the price

  • Size and thickness of the slab
  • Grading and fill needed to level the site
  • Footings and thickened edges
  • Reinforcement and vapor barrier
  • Plumbing or electrical sleeves set before the pour
  • Permits and inspections
Get your price from photos

05 · How it works

Four steps from photos to done.

  1. Step 01

    Send photos

    A wide shot, a close-up and the address. Takes two minutes from your phone.

  2. Step 02

    Ballpark by next business day

    We measure on satellite view and text you a price range.

  3. Step 03

    Site visit & firm quote

    We confirm measurements and subgrade, then send a written quote to approve.

  4. Step 04

    Tear out, pour, haul off

    One crew does the demo, the pour and the cleanup. Add a post-construction clean if you want it.

06 · Common questions

Garage & Foundation Slabs in Memphis: what people ask.

How thick should a garage slab be?

Residential garage slabs are commonly 4 to 6 inches thick with thicker edges under the walls. Your building plans or local code set the exact spec, and we pour to it.

Do I need a permit for a slab?

Slabs for garages, additions and other buildings usually need a permit and inspection. Simple pads may not. We'll confirm what your project needs.

When can we build on a new slab?

Framing can often start within days, but concrete keeps gaining strength for about a month. We'll tell you what's safe for your project and the weather.

Do you pour slabs for contractors?

Yes. General contractors and developers can send plans for a line-item bid that can also cover demolition, hauling and the post-construction clean.

What areas do you serve?

Memphis, Germantown, Collierville, Bartlett, Cordova and Arlington in Shelby County, and Southaven and Olive Branch in DeSoto County, Mississippi.